How to install a gamma camera-Medical

View Full Screen
Document at bottom of page will appear blurry at first, if you wait a bit it will become clear.

Medical device maintenance and use : Gama cameras, from image nature to detection activity and ease of use It has provided rapid developments in many issues. Gama cameras both today and Standard nuclear that can be widely used in clinical applications in the future imaging systems. The basic units and parts that make up gamma cameras; Gantry, sick table, control console, detector lesson, colimator and printing unit. Gantry from these pieces; It consists of the ring and the intelligent power supply. First of all The unit is assembled. Because the basic unit and the heaviest part. After this assembly Other assemblies are made in order in the catalog. Very attention should be paid to installation and assembly. An incorrect process during assembly may cause serious material damages. Detector lesson; Detector crystal, photo replicator tubes and electronic circuits occurs. The colimator is also found in the detector course. Types of colimators alone It does not come with the course because it is changed during use. The colimator is considered as a separate part. Usually detectors, the Gantry ring in the factory The connection is made. If there is no connection, this is done during installation. Some factors, especially the temperature in the assembly environment, are also very important. To give an example, the heat in the environment after being removed from the detector crystal package The change should not exceed 3 ° C. After the installation process is finished, the system is monitored and Trial image is taken.