Closed Areas of the Ship (Warehouse) Manufacturing-Boat-yat

View Full Screen
Document at bottom of page will appear blurry at first, if you wait a bit it will become clear.

Boat and yacht : It also provides the transition of the hoods to the lower decks over the deck at the same time It also provides sealing. The locations of the hoods, where they were on the deck and In ship types (tanker, dry load, etc.) you will see how the structures change. This is the information about the structural manufacturing and movement mechanisms of the warehouse covers. You will have seen it in the course. Warehouse covers, warehouse dialects and The construction of the graves is under the supervision of the class organizations. Next to this During the maintenance repair of the rudder machine in the rudder circle If it is possible to remove the machine parts out of this section utilized. Cover widths are detected from the standards according to the width of the machine. Control of ship chain equipment, storing ship paints and head peak tanks It is the sealing element used to descend. The head of the head of the ship at the head of the ship (Bow Thrusters) In case of failure of electric motors, maintenance to repair maintenance It takes advantage of landing on the buttons. If the fault is not resolved, this is the electric motor It is evacuated from the lid.